Choosing a shower seal starts with the joint and the water path. A shower seal is not just a strip to match by colour. The correct replacement depends on where the water is escaping, the joint or screen detail involved, the surface condition and whether the existing seal can be removed cleanly.
A replacement seal can be unsuitable if it is fitted over damp, mouldy or loose material. Before buying a product, identify whether the failed part is a flexible silicone joint, a screen seal, damaged grout or a deeper wet-area problem.
Do not assume that a screen seal, a silicone joint and grout can be replaced with the same product. The joint, surface and exposure to water all matter.
Recurring mould, damaged grout, damp skirting, staining outside the enclosure or repeated repair failure can point to a wider wet-area issue. Saba Seal can assess the visible shower joints and explain whether sealing, regrouting or further investigation is the sensible next step.
Read about Complete shower sealing, Bathroom waterproofing and view our Shower sealing gallery for examples of the type of work involved.
Start by identifying the failed joint or screen detail, then check the surface condition and how the seal is fitted. A shower sealing assessment can help when the product type or leak path is unclear.
A new layer over failed, damp or contaminated sealant is unlikely to be a durable repair. The old material normally needs to be removed and the joint cleaned and dried before suitable replacement sealant is applied.
Arrange an assessment when water escapes outside the screen, mould returns, grout is failing, a seal has separated or the bathroom shows dampness beyond the enclosure. Those signs can involve more than the visible bead.
Call 1300 557 222 with the shower’s symptoms and the type of joint that appears to have failed. Saba Seal provides local, fast service from experienced, licensed and insured specialists.
